LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Secondary And Configurable Customer Controls) >> Diagnostic Information and Procedures >> DTC B1397 or B2815 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe the scan tool Steering Wheel Controls (SWC) Switch Voltage parameter. Pressing the switch should read voltage present, and drop to 0 volts when released.