LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 519 (Engine Mechanical - 5.3L, 6.0L, 6.2L - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Base Engine Misfire with Coolant Consumption

Base Engine Misfire with Coolant Consumption

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Base Engine Misfire with Coolant Consumption

Cause Correction
Faulty cylinder head gaskets and/or cracking or other damage to the cylinder heads and engine block cooling system passages
Coolant consumption may or may not cause the engine to overheat.
  1. Inspect for spark plugs saturated by coolant. Refer to Spark Plug Inspection .
  2. Perform a cylinder leak down test. Refer to Cylinder Leakage Test .
  3. Inspect the cylinder heads and engine block for damage to the coolant passages and/or a faulty head gasket. Refer to Coolant in Combustion Chamber .
  4. Repair or replace, as required.