LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Front Drive Axle) >> Repair Instructions >> Gear Tooth Contact Pattern Inspection >> Drive Side Heel - Coast Side Heel Contact Pattern

Drive Side Heel - Coast Side Heel Contact Pattern

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Side Heel - Coast Side Heel Contact Pattern
GM585867Courtesy of GENERAL MOTORS COMPANY

Condition 

The backlash is incorrect. The ring gear is too far away from the drive pinion.

Correction 

Decrease the backlash. Move the ring gear closer to the drive pinion by adjusting the side bearing adjuster sleeves. Refer to Backlash Inspection and Adjustment .