LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Front Drive Axle) >> Repair Instructions >> Front Differential Carrier Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (9.25 inch) .
  3. Remove the air conditioning compressor for the 4.8 L, 5.3 L and 6.0 L engines. Refer to Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92, LC9 and LMG) .
    4. Fig 1: Identifying Front Axle Mounting Bracket - Front Drive Axle (8.25 S4WD and 9.25 Axles)
    GM365933Courtesy of GENERAL MOTORS COMPANY
  4. Remove the nuts and the washers from the bracket.
  5. Remove the bracket from the vehicle.
scientia non olet · About LEMON Manuals