LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Front Drive Axle) >> Repair Instructions >> Front Differential Carrier Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Axle Mounting Bracket - Front Drive Axle (8.25 S4WD and 9.25 Axles)
    GM365933Courtesy of GENERAL MOTORS COMPANY
  1. Install the bracket to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the washers and the nuts to the bracket and tighten to 90 N.m (67 lb ft).
  3. Install the air conditioning compressor for the 4.8 L, 5.3 L and 6.0 L engines. Refer to Air Conditioning Compressor Replacement (LY2, LY5, LH6, L76, L92, LC9 and LMG) .
  4. Install the differential carrier assembly. Refer to Differential Carrier Assembly Replacement (9.25 inch) .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals