Tools Required
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- J-22912-B Split-Plate Bearing Puller
- J-2619-01 Slide Hammer
- J-29369-2 Bushing and Bearing Remover (2-3 in)
- J-33791 Carrier Bushing Remover/Installer
- J-34011 Pilot Bearing Remover
- J-36599-A Side Bearing Nut Wrench
- J-36615 Side Bearing Nut Wrench
- J-36616 Axle Mount Bushing Remover/Installer
- J-45754 Pinion Bearing Race Remover/Installer - 9.25 inch Axle
- J-45765 Pinion Remover
- J-8614-01 Flange and Pulley Holding Tool