Conditions for Running the DTC

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0010, P0016, P0335, P0336, P0340, or P0341 is not set.
The engine is running.
The system voltage is between 11-18V.
The CMP actuator is enabled.
The power take off (PTO) is not active.
The rate of change in the camshaft position is less than 7.5 degrees for 3.35 seconds.