LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Automatic Transmission - 6L80/6L90 - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Transmission Fluid Cooler Flushing and Flow Test >> Forward Flush

Forward Flush

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Black Supply Hose & Clear Waste Hose
    GM1762592Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the supply and waste hoses from the vehicle cooler lines. Reverse the supply and waste hoses to provide a normal flow direction.
  2. Fig 2: View Of Main Function Switch FLUSH Position
    GM1212343Courtesy of GENERAL MOTORS COMPANY
  3. Turn the main function switch to the FLUSH position and allow machine to operate for 30 seconds.