Conditions for Running the DTC
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
P182E
- TCM DTCs: P0716, P0717, P0722, P0723, P07C0, P07BF, P077C or P077D is not set.
- ECM DTCs: P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, P0401 or P042E is not set.
- The engine speed is between 400-7500 RPM.
- The ignition voltage is between 8.6-32 V.
- Engine torque signal is valid.
P1915
- DTC P0722 or P0723 is not set.
- The transmission output shaft speed is less than 90 RPM.
- The ignition voltage is between 8.6-32 V.