LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Automatic Transmission - 6L80/6L90 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Pipe Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the left catalytic converter. Refer to Catalytic Converter Replacement (with Exhaust Clamp) .
    3. Fig 1: View Of Oil Cooling Lines & Bolt
    GM1705099Courtesy of GENERAL MOTORS COMPANY
  3. Remove the transmission fluid cooler pipe bolt (2) from the transmission.
  4. Remove the transmission fluid cooler pipes from the transmission.
    5. Fig 2: Transmission Fluid Cooler Pipe Seals
    GM2664292Courtesy of GENERAL MOTORS COMPANY
  5. Using DT-45201  remover, remove the transmission fluid cooler pipe seals from the transmission.
scientia non olet · About LEMON Manuals