LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 503 (Transfer Case - Mp 3023/3024 (NQH)) >> Diagnostic Information and Procedures >> DTC P279B >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The engine control module (ECM) monitors the state of the 4WD signal message, if equipped, over the GMLAN communication bus. The ECM uses this message to determine motor torque required and transmission shifting. There are no external circuits involved.

scientia non olet · About LEMON Manuals