LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Transfer Case - Mp 3010 (NP0)) >> Diagnostic Information and Procedures >> DTC C0398 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Key ON, engine OFF.
  2. Connect a scan tool.
  3. Monitor the IPS and RPS parameters on the scan tool. Using the transfer case shift control switch, shift the transfer case into all modes. The IPS and RPS parameters should track each other.