LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Transfer Case - Mp 3010 (NP0)) >> Diagnostic Information and Procedures >> DTC C0379 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The TCCM monitors the front axle switch signal circuit and the front axle actuator control circuit for unexpected voltages. The DTC sets if the TCCM detects a high voltage when a low voltage is expected or a low voltage when a high voltage is expected.