LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 502 (Transfer Case - Mp 3010 (NP0)) >> Diagnostic Information and Procedures >> DTC C0374 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The general system performance DTC sets based on a thermal module within the transfer case shift control module (TCCM) software. The components included in this thermal model are the motor driver within the TCCM, the shift motor, and the clutch inside the transfer case.

This fault occurs when one of the three components included in the thermal model surpass the upper limits of this model indicating possible damage to the transfer case or other driveline components. This DTC detects an over temperature condition base on a thermal model.