Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Center Stack Trim Panel | 2 N.m | 18 lb in |
| Closeout Panels to Center Stack | 2 N.m | 18 lb in |
| Cluster Trim Panel Screws | 2 N.m | 18 lb in |
| Console Extension Trim Bezel Screws | 2 N.m | 18 lb in |
| Data Link Connectors (DLC) Screws | 2 N.m | 18 lb in |
| DIC and Power Outlet Bracket Screws | 1.6 N.m | 14 lb in |
| Driver Side Kick Panel Screws | 2 N.m | 18 lb in |
| Floor Console Bracket Bolts | 9 N.m | 80 lb in |
| Floor Console End Panel Screws | 1.6 N.m | 14 lb in |
| Floor Console Top Panel Screws | 2 N.m | 18 lb in |
| HVAC Control Module to Center Stack | 2 N.m | 18 lb in |
| Instrument Panel Assembly to Carrier Support Screws | 9 N.m | 80 lb in |
| Instrument Panel Carrier Side Bolts | 50 N.m | 37 lb ft |
| Instrument Panel Upper Trim Pad Retaining Screws | 2 N.m | 18 lb in |
| Knee Bolster Screws | 2 N.m | 18 lb in |
| Onstar Module to Center Stack | 2 N.m | 18 lb in |
| Passenger Side Air Bag (PSIR) Bolts | 2 N.m | 18 lb in |
| Radio to Center Stack | 2 N.m | 18 lb in |
| Shift Handle Mounting Screw | 1.6 N.m | 14 lb in |
| Substraight to Frame Bolts | 9 N.m | 80 lb in |
| Subwoofer to Base Units | 2 N.m | 18 lb in |
| Traction Control Module to Center Stack | 2 N.m | 18 lb in |