LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Steering Column Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen and move center console rearward for access to the knee bolster bolt. Refer to Console Replacement .
  2. Remove the screws/bolts that hold the knee bolster trim panel to the instrument panel (I/P). Refer to Driver Knee Bolster Panel Replacement .
    3. Fig 1: Steering Column Bracket
    GM832829Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts that hold the knee bolster deflector to the I/P.
scientia non olet · About LEMON Manuals