LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Roof Console Replacement (Full Length) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connectors & Overhead Console (Full Length)
    GM827782Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connection to the console.
  2. Fig 2: Overhead Console Door & Headliner
    GM827783Courtesy of GENERAL MOTORS CORP.
  3. Align the overhead console with the roof console holes.
  4. NOTE: Refer to Fastener Notice .
    Fig 3: Overhead Console & Headliner
    GM827781Courtesy of GENERAL MOTORS CORP.
  5. Install the console to the roof.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).