LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Panel Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating I/P Insulator Retaining Bolts
    GM787371Courtesy of GENERAL MOTORS CORP.
  1. Remove the retaining bolts.
  2. Remove the insulator (1) from the instrument panel by pulling downwards.
scientia non olet · About LEMON Manuals