LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Panel Extension Trim Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen and move center console rearward for access to the instrument panel (I/P) extension trim plate. Refer to Console Replacement .
  2. Loosen and remove the I/P center trim panel from the I/P. Refer to Instrument Panel Center Trim Panel Replacement .
    3. Fig 1: I/P Extension Trim Plate
    GM832826Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws that hold the I/P extension trim plate to the I/P.
scientia non olet · About LEMON Manuals