LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Panel Compartment Door Lock Striker Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Compartment Striker Assembly
    GM838942Courtesy of GENERAL MOTORS CORP.
  1. Install striker bracket to instrument panel subscript loosely.
    2. NOTE: Refer to Fastener Notice .
  2. Align striker with I/P compartment door and tighten striker bracket in place.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

scientia non olet · About LEMON Manuals