LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Panel Center Trim Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen and remove the center console for access to the center trim panel. Refer to Console Replacement .
    2. Fig 1: I/P Center Trim Panel
    GM832824Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws that hold the trim panel to the I/P.
  3. Remove the trim from the tabs in the I/P.
scientia non olet · About LEMON Manuals