Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center console from the center console bracket. Refer to Console Replacement .
Remove the extension panel from the instrument panel (I/P). Refer to Instrument Panel Extension Trim Plate Replacement .

Fig 1: I/P Carrier Center Support Bracket Nut

Courtesy of GENERAL MOTORS CORP.

Remove the bolt holding the bracket assembly - I/P center.

Fig 2: I/P Center Support Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the bracket from the I/P and floor.