LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Panel Assist Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Assist Handle
    GM816332Courtesy of GENERAL MOTORS CORP.
  1. Line assist handle with holes in I/P and push the I/P assist handle into the I/P until I/P assist handle clicks into place.
  2. Pull rearward on the assist handle to ensure the handle is secure.
  3. Install the passenger side I/P side trim panel.
  4. Close the I/P storage compartment.
scientia non olet · About LEMON Manuals