LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Instrument Cluster Trim Panel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Cluster Trim Panel
    GM816354Courtesy of GENERAL MOTORS CORP.
  1. Align trim panel to I/P.
    2. NOTE: Refer to Fastener Notice .
  2. Install cluster trim panel to I/P.

    Tighten:  Tighten 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals