LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Front Floor Upper Console Trim Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Console Upper Trim Panel
    GM816360Courtesy of GENERAL MOTORS CORP.
  1. Remove the shift handle. Refer to Floor Shift Control Knob Replacement .
  2. Remove the console storage bin. Refer to Console Storage Bin Replacement .
  3. Remove the cupholder/PRNDL assembly. Refer to Console Shift Lever Bezel Replacement .
  4. Remove the center console end panel. Refer to Center Console End Panel Replacement .
  5. Pull upwards on the upper console trim panel to release the trim panel clips.
  6. Remove the upper console trim panel.
scientia non olet · About LEMON Manuals