LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Front Floor Upper Console Trim Plate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Console Upper Trim Panel
    GM816360Courtesy of GENERAL MOTORS CORP.
  1. Align the trim panel with the console.
  2. Push towards the console to engage the trim panel clips.
  3. Install the center console end panel. Refer to Center Console End Panel Replacement .
  4. Install the cupholder/PRNDL assembly. Refer to Console Shift Lever Bezel Replacement .
  5. Install the console storage bin. Refer to Console Storage Bin Replacement .
  6. Install the shift handle. Refer to Floor Shift Control Knob Replacement .
scientia non olet · About LEMON Manuals