Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Compartment Door & Center Console

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Align compartment door to center console.
Install the compartment door hinge screws (1).
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install the storage bin. Refer to Console Storage Bin Replacement .
Close compartment door and check alignment for latch assembly.