Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Shifter

Courtesy of GENERAL MOTORS CORP.

Loosen the locking screw that fastens the shift lever to the shifter.
Remove the shifter.

Fig 2: Cup Holder

Courtesy of GENERAL MOTORS CORP.

Using a flat-bladed tool, pry up on the bezel to release the clips.
Disconnect the PRNDL lamps from the bezel.
Remove the bezel.