LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Instrument Panel And Console Trim) >> Repair Instructions >> Console Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Console Upper Trim Panel
    GM816360Courtesy of GENERAL MOTORS CORP.
  1. Remove the console upper trim plate. Refer to Front Floor Upper Console Trim Plate Replacement .
  2. Disconnect the console electrical connector.
  3. Fig 2: Center Console Bolts
    GM815938Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolts holding center console to center console bracket.
  5. Fig 3: I/P Center Console
    GM816362Courtesy of GENERAL MOTORS CORP.
  6. Remove the center console.