LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Hybrid/EV Energy Storage System) >> Repair Instructions >> Drive Motor Battery with Case Overhaul >> Battery Fan Assembly Components

Battery Fan Assembly Components

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Fan & Components
GM1987259Courtesy of GENERAL MOTORS COMPANY
Battery Fan Assembly Components

Callout Component Name
1 Battery Cooling Air Outlet Duct
2 Drive Motor Battery Cable Terminal Nut
CAUTION:

Refer to Fastener Caution .


TIP:  Remove cable retainer from battery fan assembly.
Tighten 
5 (44 lb in)
3 Battery Vent Fan Duct Retainer
4 Drive Motor Generator Battery Cooling Outlet Duct
5 Drive Motor Generator Battery Cooling Blower Nut (Qty: 2)
Tighten 
6 (53 lb in)
6 Drive Motor Battery Cooling Blower Bolt
Tighten 
6 (53 lb in)
7 Battery Fan Assembly