Circuit/System Description

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

The drive motor generator battery control module is also referred to as the battery energy control module (BECM). The drive motor generator battery control module will diagnose its own systems and determine when a fault condition is present. Diagnostics and system status is communicated from the drive motor generator battery control module to the hybrid powertrain control module (HPCM) through serial data. The hybrid powertrain control module is the host controller for diagnostic trouble code (DTC) information.

The drive motor generator battery control module monitors the calculated battery voltage and the terminal voltage. The calculated voltage represents the sum of the voltages from the 20 individual battery measurements. The terminal voltage represents the total DC bus voltage as measured on the output side of the high voltage contactors.