Removal Procedure
WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the range selector lever cable heat shield bolts (1).
- Remove the range selector lever cable heat shield (2).
- Disconnect the range selector lever cable (2) from the range select lever.
- Remove the range selector lever cable retainer (1).
- Remove the range selector lever cable (2) from the cable bracket.
- Remove the range selector lever nut (1).
- Remove the range selector lever (2).
WARNING:
Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.