Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new sensor grille to the headliner.
- Install the inside air temperature sensor to the headliner and sensor grille.
- Connect the electrical connector to the inside air temperature sensor.
- Secure the headliner to the roof hook and loop retainers.
- Install the rear headliner retainers to the front headliner.
- Install the left rear coat hook, if equipped. Refer to Coat Hook Replacement .
- Install the third pillar molding. Refer to Center Pillar Upper Garnish Molding Replacement .