Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the auxiliary power outlet fuse from the fuse block.
- Remove the receptacle:
- Look into the receptacle. There are two 3 mm (0.11 in) tab windows 12 mm (0.47 in) from the front of the receptacle. The J 42059 cigar lighter socket remover pushes the plastic latches from these tab windows and the receptacle can be pulled straight out.
- Place one side of the "T" portion of the J 42059 cigar lighter socket remover into the tab window. The J 42059 cigar lighter socket remover will not fit straight into the receptacle. Angle the J 42059 cigar lighter socket remover slightly for insertion into the receptacle.
- Insert the other side of the "T" into the opposite tab window.
You must move the J 42059 cigar lighter socket remover handle toward horizontal to engage the other tab window.
- Use the J 42059 cigar lighter socket remover to pull the receptacle straight out.
- If J 42059
cigar lighter socket remover fails to release the lighter socket from the retainer, perform the following alternate method:
- Insert a small grinding tool with a cutoff wheel into the socket.
- Remove the plastic latches in the 3 mm (0.11 in) square windows.
- Use the J 42059 cigar lighter socket remover as directed above to remove the socket.