LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P0C2F >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Condition 1 

The difference between ECM or motor control module 1 crankshaft position sensor engine speed and hybrid powertrain control module calculated engine speed is greater than 1499 RPM for 1 second.

Condition 2 

The difference between ECM or motor control module 1 crankshaft position sensor engine speed and hybrid powertrain control module calculated engine speed is greater than 249 RPM for 1 second.

scientia non olet · About LEMON Manuals