LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 490 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P0A2B-P0A2D or P0A31-P0A33 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

P0A2B and P0A31 

The average of the three motor phase sensor temperatures and the motor temperature are not within 28°C (50°F) of each other at ignition ON for 3 seconds.

P0A2C and P0A32 

Motor temperature sensor signal is less than 0.29 V for 3 seconds.

P0A2D and P0A33 

Motor temperature sensor signal is greater than 4.42 V when drive motor generator torque is greater than 20 N.m (14.75 lb ft) for 3 seconds.