Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to Fastener Notice .

Fig 1: View Of Power Seat Switch & Screws

Courtesy of GENERAL MOTORS CORP.

Install the power seat switch to the bezel.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 2: View Of Seat Switch Bezel

Courtesy of GENERAL MOTORS CORP.

Install the power seat switch to bezel screws.
Install the power seat switch bezel to the seat. Refer to Seat Switch Bezel Replacement .