LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Power Seats) >> Diagnostic Information and Procedures >> DTC B1825 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

The recline motor position sensor signal circuit voltage level to the driver seat module is not within the 0.39-4.58 volt range.

scientia non olet · About LEMON Manuals