LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Trailer Brake Control System) >> Diagnostic Information and Procedures >> DTC C0870, C1112, C1113, C1114, or C1119 (Gasoline Without LY6) >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

C0870 00 

The trailer brake circuit reference voltage for the trailer brake control relay is below 4.8 V or above 5.2 V.

C1112 00

C1113 01

C1114 00 

The fuel pump/trailer brake control module detects a short to ground, open or a short to voltage on the solid state relay output circuit.

C1119 00 

The fuel pump/trailer brake control module detects a short to ground, open or a short to voltage on the relay feedback circuit.