LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Trailer Brake Control System) >> Diagnostic Information and Procedures >> DTC C0561 (Gasoline Without LY6) >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics are used to determine whether or not there is a fault with the brake pressure or wheel speed data being received by the fuel pump/trailer brake control module over GMLAN serial data.

The loss of serial data brake pressure diagnostic is to determine whether or not there is a fault with the brake pressure data being received over GMLAN. This diagnostic looks at the brake pressure signal validity and protection value signals over a period of time to determine the fault state of the brake pressure sensor.

The loss of serial data wheel speed diagnostic is to determine whether or not there is a fault with the wheel speed data being received over GMLAN. This diagnostic looks at the wheel speed signal validity and sequence number errors over a period of time to determine the fault state

scientia non olet · About LEMON Manuals