LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 487 (Engine Mechanical - 5.3L, 6.0L, 6.2L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Air Conditioning Compressor Belt Replacement (V8) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Belt
    GM1987654Courtesy of GENERAL MOTORS COMPANY
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory .
  2. Remove the skid plate. Refer to Engine Shield Replacement .
  3. Cut the belt (1) from air conditioning (A/C) and crankshaft pulleys.
scientia non olet · About LEMON Manuals