Clunk When Accelerating from Coast
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Clunk When Accelerating from Coast
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| DEFINITION: A clunking noise present when accelerating from coast to drive under load. | ||||
| 1 | Check for a loose wheel drive shaft to hub assembly nut. Is the wheel drive shaft nut loose? |
- | Go to Step 2 | Go to Step 3 |
| 2 | Tighten the wheel drive shaft to hub assembly nut to specification. Is the repair complete? |
240 N.m (177 lb ft) |
System OK | - |
| 3 | Check for a damaged inner CV joint. Is the inner CV joint damaged? |
- | Go to Step 4 | System OK |
| 4 | Replace the inner CV joint. Refer to Wheel Drive Shaft Inner Joint and Boot Replacement . Is the repair complete? |
- | System OK | - |