LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Power Steering System) >> Repair Instructions >> Power Steering Wiring Harness Extension Harness Replacement (HP2) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT:

    The power steering wiring harness extension harness is not repairable. Only replace the harness and never attempt to repair it.

    IMPORTANT:

    The wiring harness protective cover is intended to keep the wiring harness connectors contaminant free. Do not remove the protective cover from the power steering wiring harness extension harness connectors until the harness has been routed to the correct position.

  1. Remove the power steering assist motor. Refer to Power Steering Assist Motor Replacement .
  2. Mark the position and directional orientation of every fastener on the two harnesses before separating them.
  3. Separate the power steering wiring harness extension harness from the power steering assist motor wiring harness.
scientia non olet · About LEMON Manuals