LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Link Replacement (1500)

Stabilizer Shaft Link Replacement (1500)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Stabilizer Shaft Link (1500)
GM1865546Courtesy of GENERAL MOTORS COMPANY
Stabilizer Shaft Link Replacement (1500)

Callout Component Name
Preliminary Procedure 
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1 Stabilizer Shaft Link Nut
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Remove all traces of the original adhesive patch.
  2. Apply Threadlocker GM P/N 12345382 (Canadian P/N 10953489) BLUE LOCTITE # 242 on the threads of the bolts.

Tighten 
23 N.m (17 lb ft)
2 Stabilizer Shaft Link Bolt
3 Stabilizer Shaft Link Washer (Qty: 2)
4 Stabilizer Shaft Link Insulator (Qty: 4)
5 Stabilizer Shaft Link Spacer
scientia non olet · About LEMON Manuals