Locking Differential Cam Unit Assemble (8.6 Inch Axle)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Apply axle lubricant to the locking differential clutch (friction disc) contact area. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the locking differential cam (3) on the locking differential side gear (2).
- Install the locking differential clutch disc set (1) on the locking differential side gear (2).
- Compress the locking differential clutch disc set assembly.
- Using the appropriate tool, install the external span ring retainer.
- Apply a small amount of chassis grease to hold the locking differential clutch disc guide (5). Refer to Adhesives, Fluids, Lubricants, and Sealers .
NOTE:
Applying a small amount of grease to the locking differential guides will hold them in place during the installation procedure.