Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Calibrate Trim Height | - | Commands the module to calibrate trim height. |
| Compressor Test | - | Commands the air compressor and both air suspension inlet valves ON and OFF. |
| Depressurize System | - | Commands the suspension module to deflate the air springs. |
| Exhaust Solenoid | - | Commands the exhaust solenoid ON and OFF. |
| Extended Ride Height Lamp | - | Commands the ERH switch lamp ON and OFF. |
| Extended Ride Height Switch | - | Commands the module to activate extended ride height. |
| Inflator Switch | - | Commands the module to activate the accessory inflator. |
| Inflator Switch Lamp | - | Commands the inflator switch lamp ON and OFF. |
| Left Air Solenoid | - | Commands the left air solenoid ON and OFF. |
| Right Air Solenoid | - | Commands the right air solenoid ON and OFF. |