LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Air Suspension) >> Diagnostic Information and Procedures >> DTC C0696 >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition switch in the on position the current draw of both air suspension sensors and the air suspension pressure sensor is verified by the air suspension module to be within a calibrated range. If the current draw is out of range a DTC is set.

scientia non olet · About LEMON Manuals