LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Air Suspension) >> Description and Operation >> Air Suspension Description and Operation >> Ride Height Switch

Ride Height Switch

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Extended ride height is used to increase vehicle ground clearance. When the ERH switch is activated the vehicle will raise 2 inches at the rear. The extended ride height will only occur if vehicle speed is less than 64 km/h (40 mph) with all doors closed the engine running. When the switch is activated the switch LED will flash while the vehicle is transitioning to extended ride height. When the vehicle reaches extended ride height switch LED will be on continuously. The vehicle will return to normal height when the switch is activated again and the switch LED will go OFF. The vehicle will automatically return to normal height if vehicle speed increases over 64 km/h (40 mph) and the switch LED will turn OFF.