Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Using a suitable tool, remove the brake fluid from the brake master cylinder reservoir.
- Discard the brake fluid into an approved container.
- Disconnect the brake fluid level indicator switch electrical connector.
- Remove the master cylinder reservoir bolts (1).
- Carefully lift the master cylinder reservoir (1) straight upward and remove the reservoir from the master cylinder.
- Remove the master cylinder reservoir seals (1).
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .