LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 476 (Antilock Brake System - Hybrid (Hp2)) >> Diagnostic Information and Procedures >> DTC C1120 or C1121 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2012 GMC Yukon, 2012 Chevrolet Tahoe, and 2012 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

The electronic brake control module (EBCM) activates the valve relay to supply voltage to the valve solenoids. This voltage is referred to as the system voltage. The EBCM activates individual valve solenoids by grounding the valve solenoid control circuits. This verification is used to perform hydraulic checks at the normally open base brake valve, the front hydraulic circuit and the block.

scientia non olet · About LEMON Manuals